Durable and Reliable 12V 150Ah Deep Cycle Battery
Features
1. Small Internal Resistance
2. More Better Quality, More Better Consistency
3. Good Discharge, Long Life
4. Low temperature resistant
5. Stringing Walls Technology Will Transport Safer.
Application
Deep cycle maintenance free gel battery.Our products can be used in UPS,solar street light,solar power systems,wind system,alarm system and telecommunications etc.
When you choose our factory direct sale 12v 200ah deep cycle battery, you can have confidence in the quality, reliability, and performance of your power source. Trust in our battery to keep you powered up, no matter where your adventures take you.
Parameters
Cell Per Unit | 6 |
Voltage Per Unit | 12V |
Capacity | 150AH@10hr-rate to 1.80V per cell @25°c |
Weight | 41KG |
Max. Discharge Current | 1000 A (5 sec) |
Internal Resistance | 3.5 M Omega |
Operating Temperature Range | Discharge: -40°c~50°c |
Charge: 0°c~50°c | |
Storage: -40°c~60°c | |
Normal Operating | 25°c±5°c |
Float charging | 13.6 to 14.8 VDC/unit Average at 25°c |
Recommended Maximum Charging Current | 15 A |
Equalization | 14.6 to 14.8 VDC/unit Average at 25°c |
Self Discharge | Batteries can be stored for more than 6 months at 25°c. Self-discharge ratio less than 3% per month at 25°c. Please charge batteries before using. |
Terminal | Terminal F5/F11 |
Container Material | A.B.S. UL94-HB, UL94-V0 Optional |
Dimensions
Structures
Installation and Use
Factory Video and Company Profile
FAQ
1. Do you accept customization?
Yes, customization is accepted.
(1) We can customize the color of the battery case for you. We have produced red- black,yellow-black,white-green and orange-green shells for customers, usually in 2 colors.
(2) You can also customize the logo for you.
(3) The capacity can also be customized for you, normally within 24ah-300ah.
2. Do you have a minimum order quantity?
Normally yes, if you have a freight forwarder in China to handle the transportation for you. One battery can also be sold to you, but the shipping fee will normally be more expensive.
3. What are the payment terms?
Normally 30% T/T deposit and 70% T/T balance before shipment or negotiate.
4. What is the average lead time?
Usually 7-10 days. But because we are a factory, we have good control over the production and delivery of orders. If your batteries are packed in containers urgently, we can make special arrangements to expedite production for you. 3-5 days at the fastest.
5. Do you know how to tell whether the battery is fully charged?
After we charge the battery with the charger, remove the charger and test the voltage of the battery with a multimeter. At this time, the battery voltage should be higher than 13.2V, and then let the battery stand for about an hour. During this period, the battery should not be charged or discharged.After one hour, use a multimeter to test the battery voltage. At this time, the battery voltage should not be lower than 13V, which means that the battery is fully charged.
* Note: Do not measure the voltage of the battery when the charger is charging the battery, because the voltage tested at this time is a virtual voltage, which is the voltage of the charger, and cannot represent the voltage of the battery itself.